Revision: December, 30 1994
Authors:
Steve Scoggins email: [email protected] Thomas Baltis email: [email protected]Feedback:
Please click on the authors' addresses above to send your comments or suggestions. Your feedback is always welcomed and appreciated.
Copyright:
Copyright (C), 1994 Steve Scoggins & Thomas Baltis. Permission to copy all or part of this work is granted, provided that the copies are not made or distributed for resale (except nominal copying fee may be charged), and provided that the NO WARRANTY, author-contact, and copyright notice are retained verbatim & are displayed conspicuously. The incorporation of this FAQ in a CDROM archive requires written authorization. If anyone needs other permissions that aren't covered by the above, please contact the authors.
Trademarks:
Microsoft (R) Windows NT (TM) and Microsoft Windows NT Logo are registered trademarks of Microsoft Corporation. All other trademarks are registered by their respective owners.
NO WARRANTY:
THIS WORK IS PROVIDED ON AN "AS IS" BASIS. THE AUTHOR PROVIDES NO WARRANTY WHATSOEVER, EITHER EXPRESS OR IMPLIED, REGARDING THE WORK, INCLUDING WARRANTIES WITH RESPECT TO ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Availability:
This is available via:
anonymous ftp from
URL: ftp://rtfm.mit.edu/pub/usenet-by-hierarchy/comp/os/ms-windows/Windows_NT_Internet_FAQ_Part_1_2
URL: ftp://rtfm.mit.edu/pub/usenet-by-hierarchy/comp/os/ms-windows/Windows_NT_Internet_FAQ_Part_2_2
WWW at
URL: http://www.mcs.com/~thomas/www/ntfaq/
URL: http://www.luc.edu/~tbaltru/faq/
See also:
The release of Windows NT V3.5 with slip and ppp support has resulted in the following questions being asked frequently in the comp.os.ms-windows.nt.misc and in comp.os.ms-windows.nt.setup news groups. This document is intended to be a starting point for a new users guide to internet connectivity and resources using NT or NTAS slip/ppp for dialup access.
We welcome your comments on this FAQ. We also encourage you to send us any additional information you would like to see added to this document. Send your comments to the authors via the email address listed above. If you include attach files use MIME or UUENCODE for the attachments. MIME is preferred for attachments.
Third party applications - Your personal experiences with some of the commercial add-ons for Internet related products (NFS, Mosaic clients, SMTP gateways, etc.) recommendations and installation how-to for the multiple COM port cards, and the high speed UART cards.
---------- windows-nt ---------- A list for general discussions about all aspects of Windows NT in both workstation and server forms. To subscribe send a mail message to [email protected] with contents join windows-nt your_first_name your_last_name to leave use contents leave windows-nt List messages should be sent to [email protected] The administrator for the list is [email protected] to whom any queries or problems should be sent. -------------- ms-back-office -------------- Microsoft's Back Office comprises SQL Server, SNA Server, Systems Management Server and Exchange (which is Microsoft's future X400-based mail product). All these require Windows NT Server as their host system. Joining instructions and administrator as for the windows-nt list. Note: this is a new list as of 15/11/94 so its a bit quiet yet :-) -------- lanman-l -------- This list is for discussions of Lan Manager. The native networking of Windows NT is essentially the same as Lan Manager and interworking with MS-DOS, OS/2 and Windows for Workgroups all concern Lan Manager. To subscribe, send a mail message to [email protected] with contents subscribe lanman-l your_first_name your_last_name To leave use contents unsubscribe lanman-l List messages are sent to [email protected] or to [email protected]
Ed Krol, "The Whole Internet User's Guide & Catalog"
Thanks to Mark Cooke ([email protected]) for the following answer. You can use LILO with the linux partition active in the superblock instead of the MBR. Using LILO you can choose between DOS/NT and Linux. Then I use NT's boot manager to choose between Dos and NT. Installed Dos first, then Linux, and then NT. Table of Contents...
ftp://ftp.cc.utexas.edu/microlib/nt/gnu
The version endorsed by the FSF is available in binary form from ftp://cs.nyu.edu/pub/gnat This includes both Gnu Ada (GNAT) and Gnu C for Windows NT 3.5.
You can locate the HCL on FTP.MICROSOFT.COM in the following URL path: ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/hcl/hcl35
The SMC Elite16 cards work with NT V3.5 if you use the latest driver. You can get the latest driver from their bbs. They have a bbs at (714) 707-2481 or from the following ftp site. ftp://sjf-lwp.novell.com The SMC tech support email address is [email protected]
Thanks to Christopher Browne ([email protected]) at USR for the recommended MODEM.INF for various USR modems. This is the .INF as we have it now. It's been tested on NT 3.1 / 3.5 and WfW 3.11 with great success. I've been able to use all of our modems from the Courier v.34 down to the Sportster 9600 data/fax. The MAXCONNECTBPS is set at 38400 so that this file works with most of the installed base of modems. We only started supporting > 57600 with the Courier V.32t. The MAXCARRIERBPS is set but any dce-dce rate that is reported at connect is ignored since the port is locked. The first release of this file was in error since it did not contain the &B1 command and this caused considerable pain for a few folks. My apologies! Using ITU-T as our default allows a USR modem to connect with more than USR modems at higher dce rates. This can be changed runtime by the user either through the phone number "123-123-1234B0" or by changing the INF file. I would prefer to see the phone number used so that the modem stays in a more compatible mode by default. ; MDMUSR.INF ; ; For use with Windows for Workgroups, NT 3.1, NT 3.5 [Responses] ; General non-connect responses that all USR modems generate... OK=OK LOOP=RING LOOP=RINGING ERROR=ERROR ERROR_NO_CARRIER=NO CARRIER ERROR_VOICE=VOICE ERROR_NO_DIALTONE=NO DIAL TONE ERROR_BUSY=BUSY ERROR_NO_ANSWER=NO ANSWER ; General connect responses that all USR modems generate... CONNECT=CONNECT /NONE CONNECT_EC=CONNECT /ARQ ; Since serial port is locked, carrier rate is irrelevant. ; The RAS client calcuates link rate after connection is accepted. [USRobotics General] ; This selection can be used by almost ALL USRobotics modems! ; * A MAXCONNECTBPS of 38400 allows this to be used by older modems ; such as the HST 14400. ; * Compression is off by default because of the lower DTE-DCE rate. ; * ITU-T standards are on by default to ensure compatibility with ; non-USR modems. ; * X4 is set to ensure compatibility with Sportster modems. Advanced ; dial features for Courier can be activated by placing X7 in the dial ; string. (i.e. phone number field contains "1-708-676-1059X7" CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=28800 MAXCONNECTBPS=38400 =m1 =m0 =&h1&r2 =&h0&r1 =&k3 =&k0 =&m4 =&m0 =ATdt =ATd COMMAND_INIT=AT&f&a3x4e1q0v1s0=0s7=55s2=128 COMMAND_INIT=AT&b1&c1&d2b0x4 COMMAND_INIT= COMMAND_DIAL= COMMAND_LISTEN=ATS0=1 ; US Robotics modems are defined in original MODEM.INF are ; maintained here for installation purposes [US Robotics Courier Dual] ALIAS=USRobotics General [US Robotics Courier HST] ALIAS=USRobotics General [US Robotics Courier V.32bis] ALIAS=USRobotics General [US Robotics Sportster 2400] ALIAS=USRobotics General [US Robotics Sportster 9600] ALIAS=USRobotics General [US Robotics V.FC/V.34] ALIAS=USRobotics General Table of Contents...
TCP/IP Illustrated Volume 1 The Protocols by W. Richard Stevens
Published by Addison-Wesley
ISBN 0-201-63346-9
TCP/IP Network Administration by Craig Hunt
Published by O'Reilly & Associates, Inc.
ISBN 0-937175-82-X
I recommend you check out the following Web HTML document as a
starting point. "The PC-Internet Connection Update Page"
http://www.zilker.net/users/internaut/update.html
"comp.protocols.tcp-ip.ibmpc Frequently Asked Questions (FAQ)"
by Aboba, Bernard D.(1994)
email address: [email protected] (Bernard Aboba)
Aboba, Bernard D.(1994) "comp.protocols.tcp-ip.ibmpc Frequently
Asked Questions (FAQ)" Usenet news.answers, available via
ftp://ftp.netcom.com/pub/mailcom/IBMTCP/ibmtcp.zip, 57 pages.
http://www.zilker.net/users/internaut/update.html
http://www.cis.ohio-state.edu
/hypertext/faq/usenet/ibmpc-tcp-ip-faq/part1/faq.html
This FAQ is now fully HTML compatible, and is being automatically
converted to HTML. This means that if you have a WWW browser, you
can read the FAQ on-line, and click on links to download individual
files. This is how I read the FAQ myself, and it is highly
recommended.
The "PPP-FAQ" authored by Ignatios Souvatz ([email protected])
Archive-name: ppp-faq/part1 URL:
http://cs.uni-bonn.de/ppp/part1.html
Summary: This document contains information about the Internet
Point-to-Point Protocol, including a bibliography, a list of
public domain and commercial software and hardware
implementations, a section on configuration hints and a list of
frequently asked questions and answers on them. It should be read
by anybody interested in connecting to Internet via serial lines,
and by anybody wanting to post to comp.protocols.ppp
(before he/she does it!)
"Personal Internet Access Using SLIP or PPP: How You Use It,
How it Works" by Frank Hecker
ftp://ftp.digex.net/pub/access/hecker/internet/slip-ppp.txt
Table of Contents...
A.) Double click on the Main program group B.) Double click on Network C.) Click on add software D.) Choose Remote Access Service
You probably have one of three problems either the slip link is not
working, or your NT system is not accessing the UNIX service DNS,
or the IP routing is messed up between your NT system and your slip
providers UNIX network.
1.) Can you ping any addresses on the other end of the slip or ppp
link? Try pinging the UNIX server or the gateway. Drop to DOS and
use the ping command. Use the numeric IP address.
2.) Try turning VJ compression off. Sometimes telnet and FTP will
not work if you have VJ compression on and the system you are
connected to does not support VJ compression. If you are using
TIA be sure and set the NT option for VJ compression to off.
Since, TIA does not support VJ compression.
3.) Check and confirm that the following are correct:
Double click on the Main program group icon, then double click on
the Control Panel icon, then double click on Network icon, select
the TCP/IP protocol and click on the configure button. Click on
DNS and verify the following is correct:
A.) The Host Name for your PC
B.) Your Domain Name
C.) Add the proper DNS IP address or addresses for your slip/ppp
service.
Click on OK to confirm DNS changes
Click on OK to close out the TCP configuration dialog.
Click on OK to close the Network configuration dialog.
If you are not sure please ask slip/ppp service providers system
admin. to confirm them for you.
4.) Drop the baud rate to 9600, some UARTs do not work above 9600
without UART receiver overruns.
5.) Finally try finding someone else who is using NT slip or ppp
at your location. Ask the system admin. if anyone else is
successfully running NT via slip or ppp.
6.) Can you dial in using slip or ppp from a known working system
using your username and password?
7.) Are you using dynamic IP addressing (bootp)?
With slip you will have to manually login using Rasphone and
then type your IP into the little white box at the lower right
side of the screen and click on the DONE button. For PPP you
can automate the login follow the directions under question no.
27 below. Also a NT workstation using RAS to dial into a NT
server will work with dynamic IP if the NT server is configured
for DHCP.
8.) Are you using a static IP address?
The first time you dial in using the RAS SLIPP use the manual
login option, you will get a screen a 0.0.0.0 IP address displayed
in a white box at the bottom of the screen. Type in your assigned
SLIP IP address and click on the DONE button. The IP address will
be written into the rasphone.pbk as the SlipIpAddress=NNN.NNN.NNN.NNN
entry under the currently active selection in the rasphone.pbk file
located in the /winnt35/system32/ras directory.
9.) After you dial in and login in shell out to DOS and see what
the netstat -rn utility shows.
My netstat -rn returned the following info after my slip link is
connected. My IP address is 198.60.143.32 and my slip service
providers gateway is 168.158.8.5
Network Address Netmask Gateway Address Interface Metric
0.0.0.0 0.0.0.0 198.60.143.32 198.60.143.32 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
198.60.143.32 255.255.255.255 127.0.0.1 127.0.0.1 1
198.60.143.255 255.255.255.255 198.60.143.32 198.60.143.32 1
224.0.0.0 224.0.0.0 198.60.143.32 198.60.143.32 1
255.255.255.255 255.255.255.255 198.60.143.32 198.60.143.32 1
Route Table
Active Connections
Proto Local Address Foreign Address State
TCP 198.60.143.32:1249 168.158.8.5:119 ESTABLISHED
You'll find UUCP on ftp.cica.indiana.edu
Yes NTAS V3.5 allows you to setup up a range of address that the remote ras clients can request. This is called dynamic addressing or bootp. and it works. The NTAS server is configured as a DHCP server. When the remote pc calls in via RAS and is authenticated the NTAS server assigns the remote pc an IP from the pool of unused IP addresses.
A.) Use File Manager or Net Use commands to access NetBIOS-based shared drives? Yes, if the remote user is using NT Workstation V3.5 or WFWG V3.1 RAS. No, if the remote user is using most third party PPP implementations such as Chameleon TCP/IP, Spry Air Series 3.0, and Trumpet SLIP/PPP Winsock. Most of the third party TCP/IP software packages do not support NETBIOS SMB over a remote slip/ppp connection. B.) Use a POP mail client to connect to a POP server? Yes, if the remote user is using NT Workstation V3.5 and RAS PPP with the TCP/IP option enabled on both ends of the RAS link. Eudora email works great with NT V3.5 for SMTP and POP3 ftp://ftp.qualcomm.com/quest/eudora/windows/1.4/ filename eudor144.exe No, if the remote user is using WFWG V3.1 RAS. The WFWG RAS does not support PPP and TCP/IP. WFWG V3.1 RAS supports NETBEUI only.
The Windows NT 3.5 resource kit is supposed to include a DNS software package, there is also a third party product called 'DNS Magic' that runs as a NT Service, company is 'Software Innovations' (winnt#innov.com)
Thanks to Tom Horsley ([email protected]) for his suggestion of configuring PPP from the Rasphone. Instead of configuring PPP starting from the Network entry on the control panel, I find that I can configure those details from the RAS program's phonebook in the Advanced edit dialog. This actually makes perfect sense because the details are likely to be different for each phone number. For PPP you can configure the TCP/IP settings as follows: Double click on the Remote Access icon. Highlight the proper entry then click on the EDIT button. Click on Advanced if set to Basic. Click on Network button (Displays the Network Protocol Settings Dialog) Check the PPP option. Click on TCP/IP Settings If using dynamic IP addresses, check "Use server assigned IP addresses". If using a static IP address, check "Require specific IP address" and fill in your assigned address. and enter the primary and backup DNS IP addresses. The backup DNS is optional. If your provider supports compressed ppp, check Use VJ compression. and also check the use default gateway on remote network. Table of Contents...
Double click on the Main program group icon, then double click on
the Control Panel icon, then double click on Network icon, select
the TCP/IP protocol and click on the configure button. Click on
DNS and verify the following is correct:
A.) The Host Name for your PC
B.) Your Domain Name
C.) Add the proper DNS IP address or addresses for your slip/ppp
service.
Click on OK to confirm DNS changes
Click on OK to close out the TCP configuration dialog.
Click on OK to close the Network configuration dialog.
NOTE: You will have to setup Rasphone to manually dial the first time you
make a slip connection. Set the security options to "Use clear text
Terminal login only", and set the Before and After Scripts to NONE. Then
select/highlight your entry and click on Dial. You will manually login
the first time you dialup for the slip connection, after the valid login
using your username and password type slip at the remote servers
command prompt, then type your IP into the little white box at the
lower right side of the screen and click on the DONE button.
Example login script for MCS.Net in Chicago
Macro Computer Solutions (MCS-DOM)
3217 N. Sheffield
Chicago, IL 60657
(312) 248-8649
Domain Name: MCS.COM, MCS.NET
Administrative Contact, Technical Contact
Denninger, Karl [email protected]
substitute your username and password in place of the USERNAME
and PASSWORD The MCS net server uses the commands login and
password; if your's uses different words, substitute as needed.
Here's the MCS.NET script thanks to Walter S. Arnold
([email protected]) switch.inf file, pretty basic but it works
with both PPP and Slip.
[McsNet, SLIP]
COMMAND=
ERROR_NO_CARRIER="NO CARRIER"
OK="login:"
COMMAND=sculptor
ERROR_NO_CARRIER="NO CARRIER"
OK="Password:"
COMMAND=*************
ERROR_NO_CARRIER="NO CARRIER"
CONNECT="Packet mode enabled"
;ERROR_DIAGNOSTICS=
; CONNECT response means that the connection completed fine.
; ERROR_DIAGNOISTICS response means connection attempt failed
; DIAGNOSTIC information will be extracted from the response
; and sent to the user.
; ERROR_NO_CARRIER means that the remote modem hung up.
; ERROR resonses are for generic failures.
You will need to edit the switch.inf file in winnt35/system32/ras
and add an entry for your slip/ppp login script. The section you
add must have a label followed by your actual script commands.
Reference the rasphone.hlp help file and the pad.inf file in
winnt35/system32/ras for additional information.
The Microsoft NT V3.5 resource kit (when it is released) will
have additional documentation on the switch.inf file and the
script language.
The switch.inf script is as follows:
Substitute your USERNAME, PASSWORD, and IP Address
Note, this script will need to be modified to match your slip
providers login sequence.
;
[Evergreen]
;
; Wait until we get the "username:" prompt
COMMAND=
ERROR_NO_CARRIER="NO CARRIER"
OK="ame:"
;
; Give the username and wait for "password:" prompt
COMMAND=username
ERROR_NO_CARRIER="NO CARRIER"
OK="ord:"
;
; Give the password and ignore response (we're done)
COMMAND=password
ERROR_NO_CARRIER="NO CARRIER"
; Wait for "Alpine>" send the SLIP command
OK="ine>"
COMMAND=slip
ERROR_NO_CARRIER="NO CARRIER"
; Wait for my IP address
CONNECT="NNN.NNN.NNN.NNN"
ERROR_DIAGNOSTICS=
ERROR_DIAGNOSTICS=
;
; CONNECT response means that the connection completed fine.
; ERROR_DIAGNOISTICS response means connection attempt failed
; - the DIAGNOSTIC information will be extracted from the
; response and sent to the user.
;
; ERROR_NO_CARRIER means that the remote modem hung up.
; ERROR responses are for generic failures.
;
RAS PHONEBOOK SETTINGS for a SLIP connection to Evergreen
using Windows NT
Entryname: Evergreen
Modem Settings:
Modem type Microcom Deskporte FAST 28.8K
UART type: 16550 on Com2
Enable hardware flow control yes
Enable modem error control yes
Enable modem compression yes
Baud rate 57600
(use 19200 baud if you do not have a 16550 UART chip for
your selected COM port)
Network Settings: SLIP
Force header compression yes
Use default gateway yes
Frame Size = 1006
Security Settings:
Accept any authentication including clear text yes
Terminal or Script
Before Dialing none
After Dialing Evergreen
I wrote two batch files for using rasdial and it worked great! The first rasdial batch file is for initiating the connection. I then added to icons one for calling the startnet.bat and one for calling the stopnet.bat, you can use the open door icon for startnet and the close door icon for stopnet. Place these batch files in the winnt directory so they are in the Win NT path. Type path at the command prompt for path details. You can get the command line options for rasdial by typing rasdial /help The startnet.bat file contains one line as follows: rasdial evergreen and the stopnet.bat file contains one line as follows: rasdial evergreen /DISCONNECT
The following is one method submitted by (Chris Pirih)
[email protected]
Chris indicates that a better way to do this is as follows:
COMMAND=mypassword
OK="unity%"
LOOP=
COMMAND=ppp
The following is a second method submitted by Jason John Schwarz
([email protected])
For the following example:
OK for those other people who's host sends long strings of stuff
when they initially login here is a fix, I admit it is not pretty,
and if somebody has a better one I would like to see it, but this
works at my site, and it seems to be the only thing that does work.
[cc00du]
COMMAND=
ERROR_NO_CARRIER="NO CARRIER"
OK="login:"
COMMAND=myusername
ERROR_NO_CARRIER="NO CARRIER"
OK="Password:"
COMMAND=mypassword
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK=
COMMAND=
OK="unity%"
COMMAND=ppp
ERROR_NO_CARRIER="NO CARRIER"
CONNECT="Using name=mario"
Our Shiva system requires about 10 seconds to initialize before starting PPP. Try repeating the following script commands five times in your login script. ; The next line will give a delay of 2 secs COMMAND= NoResponse
I do not have the dynamic IP working for SLIP connections. This is because I do not know how to parse the IP and then transfer the dynamically assigned IP to the proper RAS variable. I asked Microsoft for additional information on the script language and I was told that the NT 3.5 resource kit is supposed to have additional documentation on the switch.inf script language but it is not released yet (supposed to be released soon). SLIP with dynamic IP You will have to interactively logon to a SLIP server by manually entering name, password, and "slip" to enter slip mode and recieve the dynamic IP address. I copied the address to the address box in the RAS terminal IP address box. Don't forget to enter the DNS IP addressby configuring TCP/IP ( control panel \ network \ advanced \ enable DNS & DNS... ). Scripting examples are included in other sections of this FAQ. After searching for where rasphone stuck my IP address, and I found it in the rasphone.pbk entry. The first time I ran the SLIP login script via Rasphone book entry I got a screen with a DONE button and the 0.0.0.0 IP address was in a white box at the bottom of the screen. I typed in my SLIP static IP address and clicked on the DONE button. This then was written into the rasphone.pbk as the SlipIpAddress=198.60.143.32 entry in the Evergreen section of the rasphone.pbk file in /winnt35/system32/ras Below is the rasphone.pbk entry for my Evergreen slip connection which uses my static IP address. [EVERGREEN SLIP] Description= AutoLogon=0 User= Domain= BaseProtocol=2 Authentication=-1 ExcludedProtocols=0 LcpExtensions=1 DataEncryption=0 SlipHeaderCompression=1 SlipFrameSize=1006 SlipIpAddress=198.60.143.32 SkipDownLevelDialog=0 I played around with a PPP connection using dynamic IP and it worked fine. This works because the PPP protocol negotiates the proper IP addresses for each end of the link and the appropriate MTU etc. Below is my rasphone.pbk entry for the Evergreen PPP connection: [ENETPPP] Description= AutoLogon=1 User= Domain= BaseProtocol=1 Authentication=0 ExcludedProtocols=3 LcpExtensions=0 DataEncryption=0 PppTextAuthentication=0 PppIpPrioritizeRemote=1 PppIpVjCompression=0 PppIpAddress=0.0.0.0 PppIpAssign=2 PppIpDnsAddress=168.158.8.5 PppIpDns2Address= PppIpWinsAddress= PppIpWins2Address= PppIpNameAssign=2 SkipDownLevelDialog=0 Below is my switch.inf login script for the Evergreen PPP login using dynamic IP. [ENETPPP] ; ; Wait until we get the "username:" prompt COMMAND= ERROR_NO_CARRIER="NO CARRIER" OK="ame:" ; ; Give the account and wait for "password:" prompt COMMAND=USERNAME ERROR_NO_CARRIER="NO CARRIER" OK="ord:" ; ; Give the password and ignore response (we're done) COMMAND=PASSWORD ERROR_NO_CARRIER="NO CARRIER" ; Wait for "Alpine>" send the PPP command OK="ine>" COMMAND=PPP ERROR_NO_CARRIER="NO CARRIER" ; Wait for my IP address CONNECT="Switching to PPP" ERROR_DIAGNOSTICS= ;ERROR_DIAGNOSTICS= ; ; CONNECT response means that the connection completed fine. ; ERROR_DIAGNOISTICS response means connection attempt failed ; - the DIAGNOSTIC information will be extracted from the response ; and sent to the user. ; ; ERROR_NO_CARRIER means that the remote modem hung up. ; ERROR resonses are for generic failures. ;
Yes NT slip will work with a TIA SLIP-via-shell account. However, Ping and traceroute will not work with a TIA SLIP-via-shell account adapter, also TIA does not support VJ compression.
No, the WFWG V3.11 RAS uses the NETBEUI protocol and does not support the TCP/IP protocol. You can use Peter Tattam's Trumpet Winsock which supports slip and ppp. ftp://ftp.trumpet.com.au/ftp/pub/beta/winsock filename wsk10b24.zip
Yes you can use the Trumpet PPP protocol to dial-in to a NT RAS PPP server. Note, you can not use SLIP for this connection since NT V3.5 RAS only supports PPP for dial-in access. However you can setup a WFWG PPP connection into a NT RAS server by using the new Trumpet 2.0A winsock. Setup Trumpet for PPP with PAP authentication as follows: Setup the following configuration for the NT RAS and TCP/IP as follows: Using the Registry editor set the following parameters: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP ForceEncryptedData REG_DWORD 0 ForceEncryptedPassword REG_DWORD 0 \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters IPEnableRouter REG_DWORD 1 Setup the Windows NT V3.5 for DHCP with a pool of available IP addresses. Install the Trumpet Winsock by following the directions in Peter's install documentation. Add the path to the Trumpet directory containing the winsock.dll to your PATH statement in your Autoexec.bat. Make sure you do not have any other vendors winsock.dll files in other directories which are in the DOS path. If you do, rename them or delete them. Setup the Trumpet for PPP with your IP set to 0.0.0.0 and the gateway set to 0.0.0.0 Turn on PAP authentication and enter your normal NT login username and password. When you have finished configuring Trumpet using the Tcpman.exe using the Setup menu, the settings are stored in the "Trumpwsk.ini" the contents of this file should look similar to the following: [Trumpet Winsock] ip=0.0.0.0 netmask=255.255.255.0 gateway=0.0.0.0 dns=nnn.nnn.nnn.nnn time=nnn.nnn.nnn.nnn domain=your.domain.com vector=00 mtu=1500 rwin=4096 mss=1460 rtomax=60 ip-buffers=32 slip-enabled=1 slip-port=2 slip-baudrate=19200 slip-handshake=1 slip-compressed=1 dial-option=0 online-check=1 inactivity-timeout=5 slip-timeout=0 slip-redial=0 dial-parity=0 font=Courier,9 registration-name="" registration-password="h[G?"Rgl" use-socks=0 socks-host=0.0.0.0 socks-port=1080 socks-id= socks-local1=0.0.0.0 0.0.0.0 socks-local2=0.0.0.0 0.0.0.0 socks-local3=0.0.0.0 0.0.0.0 socks-local4=0.0.0.0 0.0.0.0 ppp-enabled=1 ppp-usepap=1 ppp-username="kjdskjaf" ppp-password="sakfjiej" win-posn=0 2 636 410 30 415 -1 -1 1 trace-options=0 Use the Tcpman manual login option and type ATDT NNN-NNNNN followed by a return to initiate a phone call to the NT PPP server. When you see the modem CONNECT echo, hit the ESCAPE key to start up the PPP connection negotiation. Use the TCPMAN trace menu option with DNS enabled if you want to see the connection negotiations echoed to the screen. The Trumpet PPP will handshake with the Windows NT PPP and you will be authenticated. You will then see a message on the Trumpet Tcpman screen saying accepted and then you will see the dynamically assigned IP address echoed to your screen. You can use the NT RAS Admin to view the active users after the PPP PAP authentication is complete. I was able to run the Netscape Mosaic client, J Junod's WS_FTP GUI FTP client, and the Trumpet Telnet client sucessfully. The DNS name resolution worked flawlessly.
Use the NetManage Chameleon version 4.01 or later.
Edit the slip.ini file and confirm that the PPP script contains the
following line:
"SCRIPT=-n"
Confirm that the PPP client configuration is correct, and that the
defaults are valid. The router and gateway entries should be all zero.
Double-check your IP address (if dynamic allocation, this should be
0.0.0.0). The subnet mask should be the default for your IP address
(if dynamic, this will be given during PPP negotiations).
Verify that the login name, password, and domain name are all correct.
If your machine is not physically connected to a network, make sure that
the MS Loopback Adapter is installed. (That is, if you are using RAS as
your only network connection.) After adding the MS Loopback Adapter,
the network bindings will be reconfigured. You will be asked for TCP/IP
settings for the adapter. Enter your IP address and subnet mask.
Leave the default gateway clear.
Be sure that the Remote Access Service is installed. Select enable
receiving calls. Select Control panel, then Remote Access Service, then
Configure, then Network Settings enable TCP/IP in the middle section.
Configure this and allow access to the entire network (this may not be
necessary). Configure the addresses here (I used a static allocation).
Enable a requested address, if you want the WFW machine to be able to
request a specific address.
Turn on IP routing and RAS forwarding.
Using the Registry Editor, set "IPEnableRouter" (REG_DWORD) to 0x1
in order to enable IP routing.
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
IPEnableRouter REG_DWORD 1
Note that NTAS users can check this box in
\ControlPanel\Network\TCP/IP\Configure\Advanced
If other clients on the local subnet will be using the NT RAS
server as a router, you should also set the following:
\HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RasArp\Parameters
You may need to add the registry key entry "DisableOtherSrcPackets".
Set "DisableOtherSrcPackets" (REG_DWORD) to 0x0 to enable the IP packets
from the other clients on the local ethernet to pass through the
NT gateway. You can also set it to 0x1 to disable other clients IP
packets.
UUPC/extended is a PC based version (and pun of) UUCP (UNIX-to- UNIX
copy). UUPC/extended is a program which implements peer-to- peer
networking for using the UNIX UUCP protocols. Windows NT, Windows, MS-DOS
or OS/2 based Personal Computers using these protocols can exchange
mail and files with a UNIX system or other UUPC/extended systems over
dial up or dedicated phone lines.
Automated mail server running at Kendra Electronic Wonderworks.
Clarkson University BBS
Registering your current copy
Note: Because of time and disk space restrictions, we do not
manually e-mail copies of the source or executables,
provide custom .ARC or .ZIP files with only a limited
set of the files, or provide other custom distribution
services-- please don't ask.
Instructions
Anonymous FTP
UUPC/extended 1.12b for Windows NT is available via ftp:
ftp://ftp.wustl.edu/systems/ibmpc/win3/nt
upc12bn1.zip 931004 UUPC/Extended UUCP Clone for NT
upc12bn2.zip 931004 UUPC/Extended UUCP Clone for NT
upc12bn3.zip 931004 UUPC/Extended UUCP Clone for NT
The master site for UUPC/extended is located at
Clarkson University at the following URL:
ftp.clarkson.edu, IP address 128.153.4.2, directory pub/uupc
FTP programs vary from system to system; contact your local system
support staff for instructions on anonymous FTP.
Kendra Electronic Wonderworks archive server
Send a mail message containing the commands "index" and/or "help", one
command per line, in the body of the message to [email protected] for the
current file list and/or instructions.
Clarkson University Bulletin Board
The Clarkson University Bulletin Board is reached 24 hours a day at
(315)268-6667, 8N1, 1200/2400 Baud. Follow the instructions after logon
to download files.
Registering your current copy
To receive a copy of the next major release when it becomes available,
register your current copy according to the instructions in How to
Register UUPC/extended. You can also order the current release from us
using the form in How to Register UUPC/extended.
About the files
The available UUPC/extended files include:
Name Description
index The current directory listing for the
UUPC/extended archive. (Only available on
kewgate and the various Clarkson systems)
upc12bad.zip Formatted documentation files for UUPC/extended
upc12baw.zip Word for Windows documentation source files for
UUPC/extended
upc12bap.zip Documentation files formatted for a PostScript
printer
upc12bn1.zip Executable files for Windows NT for Intel x86, 1
of 3.
upc12bn2.zip Executable files for Windows NT for Intel x86, 2
of 3.
upc12bn3.zip Executable files for Windows NT for Intel x86, 3
of 3.
upc12bs1.zip Source files for UUPC/extended, 1 of 2.
upc12bs2.zip Source files for UUPC/extended, 2 of 2.
howtoget.txt This file. (Only available on kewgate and
various Clarkson systems)
announce.txt A summary of the newest release. This file is
generally an abridged version of the current
CHANGES.PRN file included in the documentation
archive. This file is not created if the current
release has limited changes. For all releases,
CHANGES.PRN is the definitive summary of
changes. (Only available on kewgate and various
Clarkson systems)
Note: Windows NT users will want upc12bn1.zip, upc12bn2.zip,
upc12bn3.zip, and upc12bad.zip.
The following is based on the information I received from several sources, you might want to try enabling the following registry entries: Also, make sure you enable routing on the NTAS servers on both ends of the PPP to PPP link. Do not use the same IP address for the local ethernet card and the RAS PPP to PPP link. The local ethernet card should have an IP assigned from you local subnet, and the PPP IP address should be assigned from the Internet providers subnet you are dialing into using RAS. You will have to use the route command to add a static route from the NT server to other machines on the local subnet. Use the netstat -rn command on the NT server to confirm proper routing table entries after you establish the RAS PPP to PPP link. Enabling Routing of IP Packets on RAS Clients for NTAS V3.5 \HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters IPEnableRouter REG_DWORD:0x1 Enables IP routing REG_DWORD:0x0 Disables IP routing You must set the DisableOtherSrcPackets registry entry on RAS clients if you want to route IP packets through that RAS client. This parameter only affects forwarding of packets on the client side--this does not affect the server. Note: (I could not find this entry so I assume you must add it.) The registry path for this entry is: \HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RasArp\Parameters DisableOtherSrcPackets REG_DWORD:0x1 Disable IP packets from external sources REG_DWORD:0x0 Enable IP packets from external sources Controls the routing of IP packets with an IP source address other than the IP address of the RAS network adapter card. Set to 0 packets with source address other than the IP address of the RAS adapter will be sent. Set to 1 packets with source address other than the IP address of the RAS adapter will not be sent. Default: 1 We received the following message from Carl Byington with comments on the use of Windows NT as a TCP/IP gateway with IP routing enable. FROM: Carl Byington TO: Steve Scoggins DATE: 11/9/94 11:23 AM Re: Routing with PPP works! Well, it does work but there are some pitfalls. We have a class C internet network that is subnetted, and my part of it uses the subnet mask 255.255.255.248 - that gives me 8 host addresses, 2 of which are loopback and broadcast so I can have 6 hosts on my subnet, although I currently have only two machines. My host addresses are .17 and .18 and the reserved ones are .16 and .23. The .18 machine is the secondary machine without a modem. The .17 machine is the primary machine with the modem and another IP address for the RAS link. The RAS link uses IP addresses .9 (the Unix end) and .10 (my end). Note that this puts the RAS link on a different network than my local ethernet. I have SYSTEM/CurrentControlSet/Services/RasArp/Parameters/DisableOtherSrcPackets set to 0 (I had to create this entry). I have SYSTEM/CurrentControlSet/Services/Tcpip/Parameters/IPEnableRouter set to 1. The configuration for .18 is default gateway = .17 dns server address = .130 The configuration for .17 is default gateway = .17 dns = none The RAS configuration on .17 is require specific IP address = .10 dns server address = .130 use default gateway on remote network With that configuration, if I just boot .17, I can ping .18 but not .130 since we are not connected yet. After bringing up the RAS link, I can ping .130 and the rest of the world. HOWEVER, we are not done yet. Attempts to ping from .17 to .18 cause NT to die with the blue screen. This is on the 807 debug build from MSDNII. So we reboot .17 and this time set a static route to .18 with 'route add x.x.x.18 x.x.x.17' reconnect the RAS link and everything works like a charm. Both .17 and .18 can ping the world thru the RAS link, and both can run Mosaic. WHEE!! It seems that the 'use default gateway on remote network' setting in the RAS tcp/ip dialog overrides all the local routing unless you have static routes set. If the local network had a lot of machines, that would be a real pain. In my case, I can just have the startup group run a single route add command. The other problem is that the route add does not work unless you are logged in with administrator privileges, and it does not stick around between reboots. Therefore, after every reboot, you need to log in as administrator and reset the local static routes. If you fail to do this, then bringing up the ras link and pinging local machines kills your machine. Oh well, at least the consequences are severe enough that the training time is fairly small. Thank you very much for all your help with this!
You can use the Winsock Application FAQ, by Larsen Consulting as a
starting point for a list of winsock applications and where to find
them.
http://www.ramp.com/~lcs/faqhtml.html
(This will be moved to www.LCS.com sometime in the next two months)
Eudora
Email for SMTP and POP3
ftp://ftp.qualcomm.com/quest/eudora/windows/1.4/
filename eudor144.exe
WinVn NNTP News Reader
ftp://titan.ksc.nasa.gov/pub/win3/winvn
filename winvn_92_5.zip
Trumpet NNTP News Reader
ftp://ftp.utas.edu.au/pub/pc/trumpet/winsock
file name wtwsk10a.zip
Cello
ftp://ftp.law.cornell/pub/L11/Cello
filename cello.zip
NCSA 32 bit Mosaic Client
ftp://ftp.ncsa.uiuc.edu/PC/Mosaic
filename wmos20a8.zip
Netscape Communications Corporation Netscape Navigator(TM) WWW Client
http://home.mcom.com/home/welcome.html
ftp://ftp.mcom.com/netscape/
Netscape Navigator for free evaluation, academic or non-profit use can be obtained via
anonymous FTP from ftp.mcom.com. Free evaluation use allows individuals to use the software
for the purpose of determining whether they want to purchase an ongoing software license.
Academic and non-profit use means that students, faculty and staff of educational institutions and
employees of non-profit organizations have unlimited free use of the software. Educational
institutions and non-profit organizations can also obtain a license free of charge to redistribute
Netscape Navigator to these individuals. Organizations or individuals wishing to use Netscape
Navigator for commercial purposes can purchase supported, licensed copies of Netscape
Navigator directly from Netscape Communications. Pricing starts at $39 for a single user license,
and volume discounts are available for right-to-copy licenses for multiple users.
Netscape Communications Corporation:
1-800-NETSITE (1-800-638-7483) (DOMESTIC)
1-415-428-4330 (INTERNATIONAL)
1-415-254-2693 (FAX)
[email protected]
[email protected]
For data sheets and company information: [email protected]
For technical support: [email protected]
For Netscape Navigator software beta information: [email protected]
To order our products: [email protected]
http://home.mcom.com/MCOM/ordering_docs/index.html
for training information: [email protected]
Spry Air Mosaic Client
http://www.spry.com/
ftp://ftp.spry.com/
WS_FTP32
ftp://129.29.64.246/pub/msdos
ftp://freebsd.cdrom.com/.5/cica/winsock
filename ws_ftp32.zip
The latest version of this application should always be the file
/pub/msdos/winsock.files/ws_ftp.zip on ftp.usma.edu (129.29.64.246).
To access it, enter 129.29.64.246 as the host name and check the
"anonymous login" box in the WS_FTP connect dialog box.
The latest version is usually uploaded winftp.cica.indiana.edu in
the /pub/PC/win3/winsock directory as ws_ftp.zip. A test Windows
NT version of this program may be found as follows:
ws_ftp32.zip on ftp.usma.edu.
Beta versions are only available from ftp.usma.edu in the
/pub/msdosdirectory as ws_ftp.zip.beta
Source code for the 93.12.05 version is in the file ws_ftp_s.zip
in the /pub/msdos/winsock.files directory on ftp.usma.edu.
Windows NT FTP & WWW Sites Microsoft Corporation World-Wide-Web Server http://www.microsoft.com/ The latest Microsoft Windows NT 3.5 hardware compatibility list (HCL) ftp://ftp.microsoft.com/bussys/winnt/winnt-docs/hcl/hcl35 California State University San Marcos Library Technical Services (Great collection of Windows NT files!) Windows NT WWW Page http://coyote.csusm.edu/cwis/winworld/nt.html Windows NT FTP server ftp://coyote.csusm.edu/pub/winworld/nt Digital's Home Page http://www.dec.com/ Neat guide to internet application software for the Digital Alpha AXP servers http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog The Advanced Systems User Group http://128.150.146.76/ASUG.HTML The Advanced Systems User Group is a Windows NT-only user group. It was founded in August 1993 in Washington, DC. Microsoft Chairman and CEO Bill Gates attended the first ASUG meeting in October 1993. In it's first year the ASUG has grown to nearly 2,500 members. They also have a Windows NT Bulletin Board System, located in Washington, DC Dial: 202-244-1161 or 202-244-1168 (use 8N1) All-Windows interface; true client-server, you haven't seen anything like this! Rocky Mountain Windows NT Users Home Page http://budman.cmdl.noaa.gov/RMWNTUG/RMWNTUG.HTM Netscape Communications Home Page http://home.mcom.com/ NASA Goddard Space Flight Center Windows NT and NT Advanced Server Information Page http://ms-nic.gsfc.nasa.gov/Titles/WinNT.html EMWAC Web Server http://emwac.ed.ac.uk/html/top.html ftp://emwac.ed.ac.uk/ gopher://emwac.ed.ac.uk/ The European Microsoft Windows NT Academic Centre (EMWAC) is an integral part of the Computing Services of the University of Edinburgh and has been set up to support and act as a focus for Windows NT within academia. It is sponsored by Datalink Computers, Digital, Microsoft, Research Machines, Sequent and the University of Edinburgh. This WWW Service is provided from a Sequent WinServer running Windows NT. EMWAC's Internet Toolchest for Windows NT http://emwac.ed.ac.uk/html/internet_toolchest/top.html The HTTP Server for Windows NT implements the HTTP/1.0 protocol. It runs as a Windows NT "service", just like the FTP Server which comes with Windows NT. By analogy with the UNIX HTTP server daemon which is called httpd, the Windows NT HTTP server service is called https. The HTTP server service is configured using a Control Panel "applet". (Note: you will also find a Freeware Gopher Server and WAIS Server at this URL.) University of Karlsrruhe, Germany NT Support Center http://jerusalem.windows-nt.uni-karlsruhe.de/english.htm WINDOWS NT Information - Main Menu- Stuttgart Germany,http://www.informatik.uni-stuttgart.de/misc/nt/nt.html http://raj-server.srv.cs.cmu.edu/ TELNET Server for Windows NT on Intel Ataman Software makes a shareware telnetd for Windows NT (it comes bundled with rlogind and rexecd). You can pick up the unregistered version via anonymous ftp from: ftp://rmii.com:/pub2/ataman/products/ filename atrls15i.zip (Intel) It can also be found in the WUGNET, WINSHARE and MSWIN32 CompuServe Forums, keyword TELNETD and in the Windows NT section of America Online. Archie client for Windows NT ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip GNU binaries for Windows NT ftp://ftp.cc.utexas.edu/microlib/nt/gnu TCP/IP files for Windows NT ftp://ftp.cc.utexas.edu/microlib/win/tcpip Sendmail for Windows NT WinNT's Blat ver 1.0 gepasi.dbs.aber.ac.uk:/blat10.zip ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip Some other interesting Winsock Internet Sites -------------------------------------------------------------------- Winsock Application FAQ - Larsen Consulting (An extensive guide to Winsock applications) If you are looking to see what has been released/updated within the last 20 days (and is FTP'able), point your WWW client to: http://www.LCS.com/newfaq.html To peruse the entire listing of FTP'able Winsock Applications: http://www.LCS.com/faqhtml.html -------------------------------------------------------------------- ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock ftp://ftp.wustl.edu/systems/ibmpc/win3/winsock ftp://ftp.halcyon.com/disk2/tiskwin ftp://nigel.msen.com/pub/systems/ms-windows/networking/winsock/apps ftp://dorm.rutgers.edu/pub/msdos/winsock/apps ftp://ucselx.sdsu.edu/pub/ibm/winsock ftp://dime.cs.umass.edu/pub/rcf/opine-dist/msdos/winsock ftp://risc.ua.edu/pub/network/winsock ftp://ftp.uga.edu/pub/msdos/mirror/winsock
http://www.digital.com/cgi-bin/www-swdev/PRODUCTS/CATALOG/catalog
NFS Server for Windows NT. Email [email protected] for more information Beame & Whiteside Software, Inc. Ph: 919-831-8989 706 Hillsborough St. FAX: 919-831-8990 Raleigh, NC 27603-1655 Intergraph Corporation One Madison Industrial Park CR1102 Huntsville, AL United States 35894 Contact: John Allen Phone: (205) 730-6112 Application: PC-NFS for Windows NT V2.0 Operating System: NT Status: QTR4 CY1994 Description: A co-development effort of Sun Select and Intergraph Corporation. Provides Windows NT users with network access to files on UNIX and other systems acting as NFS servers. The Intergraph Corporation NFS solution includes two products: PC-NFS for Windows NT and DiskShare for Windows NT. The X Window System server is called eXalt. These products promote open communication and NT Advanced Server, and UNIX operating systems WWW home page for Intergraph http://www.intergraph.com/ by electronic mail: [email protected] by telephone from the U.S.: information:1-800-345-4856 support:1-800-633-7248 training 1-800-240-4300 regional sales information:1-800-240-1000
ftp://nigel.msen.com/pub/packages/infosystems/www/servers/https/hsi386.zip ftp://ftp.cica.indiana.edu/pub/pc/win3/winsock/serweb03.zip ftp://freebsd.cdrom.com/.5/cica/winsock/serweb03.zip
You can use CU_HTML which is available via anonymous ftp from ftp.cuhk.hk in the directory /pub/www/windows/util. It's a document template for Word 2 or 6. It's well integrated with Word and includes its own tool bar for commonly used html statements.
Alex Miller ([email protected]) wrote:
My company (Ataman Software) makes a shareware telnetd for Windows
NT (it comes bundled with rlogind and rexecd). You can pick up
the unregistered version via anonymous ftp from:
ftp://utahwired.com:/users/ataman/products/
atrls13i.zip (Intel)
atrls13a.zip (Alpha AXP)
It can also be found in the Windows NT section of America Online and
the WINSHARE, WUGNET, and MSWIN32 forums on CompuServe (search for
keyword TELNETD).
Pedro Mendes, ([email protected]) just finished making one such program, and it is freeware, see below: WinNT's Blat ver 1.0 has been uploaded to the following FTP sites: ftp://gepasi.dbs.aber.ac.uk:/blat10.zip ftp://ftp.cica.indiana.edu:/pub/pc/win3/nt/blat10.zip Distributions are in the form of .ZIP files, be sure to use binary mode FTP to do the transfer. Blat is a command line SMTP mail client for Windows NT, originally by Mark Neal and Pedro Mendes. A great part of the code in this program was produced by the WinVN team (including GENSOCK.DLL). Both source code and binaries for intel 80486 are distributed. Recompile the source code if you need it for a different architecture. below is a description of the program: Blat is a Public Domain (generous aren't we?) Windows NT console utility which will e-mail a file to a user via SMTP. The program requires the "gensock" DLL (borrowed from WinVN). A Registry entry is generated when the program is used with the -SMTP flag. This stores the address of the SMTP server, and the address of the _default_ sender (this may be overridden with the -f flag). Impersonation can be done with the -i flag which puts the value specified in place of the senders address in the "From:" line of the header, however if this is done the real senders address is stamped in the "Reply-To:" and "Sender:" lines. This can be useful when using the program to send message from NT users that are not registered on the SMTP host. SYNTAX: Blat (filename) [-s (subject)] -t (recipient) -f (address) -c (carboncopy) [-i (address)] Blat -SMTP (server address) Blat -SMTP (server address) (senders address) Blat -h -SMTP (server address): address of SMTP server, -SMTP (server address) (senders address): address of SMTP host, default sender (filename): the file with the message body, -s (subject): the (optional) subject line, -t (recipient): the recipient's address(es), -t (recipient): address(es) for carbon copies, -f (sender): the sender's address (must be known to the SMTP server), -i (address): a 'From:' address, not necessarily known to the SMTP server. -h: this help.
ftp://freebsd.cdrom.com/.5/cica/winsock/wsarch06.zip
William Cheung ([email protected]) has developed a program called WinRSH/WinRSH32 - Remote Shell for Windows 1.6 This is an eighth release of WinRSH - Remote Shell for Windows The following details what are fixed/improved in this version: WinRSH 1.6: 1. Added a message bar to display messages internal to WinRSH. 2. Fixed occasional screen garbling bugs. 3. Disconnection from the remote host is now more responsive. 4. Fixed a bug in not able to check the "Log to File" menu once it is unchecked. 5. The source code is now distributed as part of WinRSH in the SRC directory under the GNU licenses and agreements. For those who don't know what WinRSH is... WinRSH contains a very simple user interface to allow a Window's user to run a program remotely on your workstation using either the RSH daemon or the REXEC daemon. The results of the remote execution are then displayed in a scrollable window. The following is an excerpt from readme.txt included in the distribution. WinRSH - Remote Shell for Windows 1.6 WinRSH32 - Remote Shell for Windows 1.6 Written by William Cheung ([email protected]) Copyright (C) 1994 William Cheung All Rights Reserved. WinRSH/WinRSH32 is free software; you can redistribute it in its entirety in any form you like. If you find any bugs, feel free to send me an email at [email protected]. Please read "license.txt" for GNU licensing information. If you have added new features to WinRSH, please send me all the source code modifications, including the version of WinRSH that you are based on. Your additions may benefit other users. Requirements o An IBM-PC or compatible computer using 386 or above CPU with at least 4 MB RAM. o Window Socket installed properly. o A host supporting at least one of RSH or REXEC daemon. Downloading Instructions You can now ftp WinRSH from datacom.ee.ubc.ca [137.82.57.20]. Login as an anonymous user and change directory to /pub/pc/winsock. The file is called wrsh16.zip. Table of Contents...